Latest news
Awards, events and news from GeDy TrAss
GeDy TrAss at Wave by Vento in Turin
From 7 to 9 October 2026 we were at OGR Torino for Wave by Vento, the European tech conference formerly known as Italian Tech Week.
GeDy TrAss at the Access 2 Finance Investor Day in Milan
On 1 October 2026 GeDy TrAss pitched to investors at the Investor Day of Access 2 Finance, the EIT Manufacturing South programme for manufacturing start-ups.
GeDy TrAss at Motor Valley Fest 2026
From 28 to 31 May 2026 we were back in Modena for the eighth edition of Motor Valley Fest.
A greener e-bike gearbox, designed by City Tech students with GeDy TrAss
In spring 2025 and again in spring 2026, City Tech students in New York designed the gearbox of an e-bike with GeDy TrAss and then built the gear pairs with 3D printers.
GeDy TrAss at the ePowertrain Tech Summit 2026 in Munich
On 26 and 27 March 2026 we were in Munich for the ePowertrain Tech Summit, the meeting on electric powertrains for the automotive industry.
GeDy TrAss at Automation & Testing 2026
From 11 to 13 February 2026 we were back at A&T in Turin, the fair for 4.0 and 5.0 technologies, at Oval Lingotto Fiere.
GeDy TrAss at Motor Valley Fest 2025
From 5 to 8 June 2025 we were in Modena for Motor Valley Fest, the festival of the Italian land of engines.
From Bit to Bulk: GeDy TrAss at New York City College of Technology (CUNY)
On 3 April 2025 Carlo Rosso and Andrea Re told how GeDy TrAss went from research software to a web platform, at the Physics Department of City Tech, CUNY, in New York.
GeDy TrAss at Automation & Testing 2025
From 12 to 14 February 2025 we were at A&T, the Turin fair for automation, testing, measurement and digital technologies, at Oval Lingotto Fiere.
GeDy TrAss at MOVE 2024 in London
On 19 and 20 June 2024 we took part in MOVE, the international mobility event at ExCeL London.
GeDy TrAss at Automation & Testing 2023
From 22 to 24 February 2023 we were at A&T, the Turin fair for automation, testing and measurement, at Oval Lingotto Fiere.
Free live webinar: dynamics in meshing gears
In June 2020 we held a free live webinar on meshing dynamics and on the importance of NVH analysis in the early design phases of gears.
GeDy TrAss is a new Politecnico di Torino spin-off
The department of mechanical and aerospace engineering (DIMEAS) has recognised GeDy TrAss as a Politecnico di Torino spin-off.
PubliTec talks about us on InMotion magazine
InMotion, the PubliTec magazine on power transmission and motion control, included GeDy TrAss among the new technologies of the sector.
GeDy TrAss pre-incubated in the best public incubator of the world
The GeDy TrAss incubator I3P has been elected by UBI Global World Rankings of Business Incubators and Accelerators 2019-2020 as the best public incubator in the world.
Automation and Testing Innovation Prize 4.0 was assigned to GeDy TrAss
GeDy TrAss has been awarded as the best start-up in the public category after the project exposition in the design and process development thematic area.
GeDy TrAss is classified among the six best start-ups in Piedmont and Aosta Valley
During the regional competition Start Cup 2018 GeDy TrAss was recognised as one of the six best start-ups and it was admitted to the National Innovation Prize PNI held in Verona.